Extendable Arm Awning

Extendable Awnings 

(Folding Arm Awnings)

  • extendable-arm-awning-folding-arm.jpgThis awning is mounted directly onto your wall or under the eave (Special brackets have been designed by Sunwise Blinds to accommodate these mountings).

  • The awning consists of a square back bar which sits within the brackets already mounted, and the roller/cloth and arms are attached to this bar.

  • An optional weather box is also available.

  • Variable pitch arms are used as they allow greater adjustment in both vertical and horizontal pitch. 

  • The awning can then be extended or retracted by either a manual crank drive, or motorized - either way the awning can be fully extended or only partially extended. 

  • This awning can be up to approx 7-8 metres wide with up to 3.6 metres projection.

  • Wind and sun sensors are also available.

Check out our motorisation page

extendable-arm-awning-folding-arm-2.jpgSpecifications and Features
  • 40x40 Square Steel Bar Powder coated in 3 standard colours White, Ivory, or Grey
  • Top Tube is 70mm Galvanized. By joining the profiles this system can span up to 18mtrs wide and project up to 3.6mtr.
  • 11:1 Ratio Gear Box is standard, however unit can also be motorized with an electric motor fitted internally in the roller tube, which if desired can be converted to a sun/wind sensor and remote control.
  • Streamlined Heavy Extruded Front Bar. Can also have an Optional Variable Valance, which gives you yet another crank driven drop down blind.
  • Heavy Duty Arms have stainless steel chain for strength and durability, with individual arm Pitch Control ranging from 0-45 degrees or 45-90 degrees.

 

Find Out More About Motorisation

 

Find Out More About Motorisation

There are no products listed under this category.